There is also the Xsane tool, which is far more powerful than iscan. The iscan tool also integrates perfectly into The GIMP, so all your image needs can be met within one tool. The iscan package is a simple scanning tool for Epson scanners. You can find the iscan tool within Synaptic. My Epson Perfection V30 was not on the list and I still managed to get it working with the help of iscan. But don't let your scanner not being on that list stop you. The first thing you will want to do is check the Sane supported scanner listing on the Sane Project site. The improvements in scanner support have been made possible by the Sane Project. Now many scanners are supported under Linux and the tools available for scanning have improved greatly. But, as usual, Linux caught up and USB scanner support started appearing. When USB scanners replaced the old parallel port scanners it seemed nothing would work. I did find an entry in /lib/udev/rules.d/les which has MODE ="0664" for USB devices.In the past, Linux has had some serious issues with scanning tools. My understanding is that these are rules distributed with the system. The only other rules.d directory I have is /lib/udev/rules.d. Of course, XSane had to be removed and reinstalled in all this.Ĭode: BUS="usb", ACTION="add", SYSFS="1604", RUN+="/bin/sh -c '/usr/bin/usx2yloader'"les and les. I may just go back to the beginning and start over.ĭid you only remove and install the libsane packages, or did you include any others? I don't know whether there is something about the combinations or not, but I do know everything worked at one point. If that doesn't fix things, I am going to remove the libsane-extras-1.0.19 and try the apps. Later today, I am going to upgrade sane-utils-1.0.19 to sane-utils-1.0.20 and try the programs. I did that assuming the packages should be at the same level to avoid problems. I think I removed libsane-extras-1.0.20 and sane-utils-1.0.20 and then installed libsane-extras-1.0.19 and sane-utils-1.0.19 after first trying the applications. Initially, both my scanners were recognized after doing that (XSane saw them both Vuescan saw only the Coolscan V ED since it doesn't support the 3570c under Linux). There is one thing that is curious though. Yes, I removed libsane-1.0.20 and installed libsane-1.0.19. (4) Why would my permissions have changed?Ĭan you confirm that you installed the old libsane version? (3) If things are correct so far, to what do I need to set the permissions? (2) If so, is the file I need to set permissions on /dev/bus/usb/002/007? # Most Scanners connected to the parallel port or other proprietary portsĭevice `hp3500:libusb:006:003' is a Hewlett-Packard ScanJet 3500 scannerĭevice `coolscan2:usb:libusb:002:007' is a Nikon LS-50 ED film scannerĭevice `hp_rts88xx:libusb:006:003' is a Hewlett-Packard ScanJet 3530C flatbed scannerĭevice `hp_rts88xx:libusb:006:003' is a Hewlett-Packard ScanJet 3570C flatbed scanner # Not checking for parallel port scanners. Try scanimage -L and read the backend's manpage. # Your USB scanner was (probably) detected. # you have loaded a kernel SCSI driver for your SCSI adapter.įound USB scanner (vendor=0x04b0, product=0x4001 ) at libusb:002:007įound USB scanner (vendor=0x03f0, product=0x2005) at libusb:006:003 If you expected something different, make sure that # scanner is powered up and properly connected to your computer. # result is different from what you expected, first make sure your # sane-find-scanner will now attempt to detect your scanner. Kingston DataTraveler 2.0 Stick (4GB) / PNY Attache 4GB Stickīus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubīus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 006 Device 004: ID 413c:2006 Dell Computer Corp.īus 006 Device 003: ID 03f0:2005 Hewlett-Packard ScanJet 3570cīus 006 Device 002: ID 413c:1004 Dell Computer Corp.īus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Wheel Mouse Opticalīus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 001 Device 004: ID 0930:6545 Toshiba Corp.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |